Contact us to order
Out of stock
Shur-Cover side to side electric sheet system (Trailer) with Smart 3 Remote
The Shur-Cover is an electrically powered sheeting system operating from Side to Side which is suitable for both rigid vehicle and trailer applications. The Shur-Cover electric sheeting system provides both load containment and weather protection offering a water proof seal and excellent heat retention.
The Shur-Cover is an extremely versatile system that is suitable for a range of applications such as aggregate, asphalt, grain, feed, waste, and offers the best value for money in the market. Typically configured to rotate from left to right when covering the load, but also available in reserve roll if required the Shur-Cover sheeting system is capable of securely covering heaped loads in less than 10 seconds.
The Shur-Cover truck sheeting system is a very versatile solution for aggregate, asphalt, grain, feed and waste applications.
The Shur-Cover design is tried and tested, with webbing straps pulling the sheet from side to side. These straps are driven by two electric “smart” motors set to a “push and pull” configuration. Unique to the Shur-Cover is the ability to set the strap lengths to accommodate the sheet opening over the side rail of the trailer, this unique feature results in a 100% unobstructed load opening. In many installations this feature also eliminates the need for tarp stops on the side of the vehicle.
Operation is via a “hold to run” push button remote control and /or via the chassis mounted control box.
It’s a simple two button operation:
The Shur-Cover electric side to side system comes as standard with remote control Smart technology and is manufactured to the highest standards: